JBA Speed Shop » Earls
Earls Categories
These units allow the adaptation of an oil cooler to any engine while maintaining the stock oil filter location.
For use as “pre-” filters for oil systems. Easily disassembled for inspection and cleaning.
To insure quick warm up under cold weather conditions, use our oil-stat. This uniquely designed product controls oil temperature like a thermostat controls water temperature in a radiator. Designed...More Details »
Earl's Perform O Flex™ stainless braid protected synthetic rubber hose is the premium quality racing hose depended on by the top racing teams of every professional sanctioning body in the world!
Earl's Perform O Flex™ stainless braid protected synthetic rubber hose is the premium quality racing hose depended on by the top racing teams of every professional sanctioning body in the world!
Due to extreme pressure spikes at the end of steering travel, power steering hose requirements are among the toughest in the industry. These steel hose ends have been specifically developed to meet these standards.
A triple steel and fabric braid reinforced high pressure hose developed specifically to meet the demands of power steering systems, this flexible hose is also suitable for hydraulic and air lines.
A triple steel and fabric braid reinforced high pressure hose developed specifically to meet the demands of power steering systems, this flexible hose is also suitable for hydraulic and air lines.
Due to extreme pressure spikes at the end of steering travel, power steering hose requirements are among the toughest in the industry. These steel hose ends have been specifically developed to meet these standards.
EVERY HOSE assembly should be pressure tested prior to installation. Earl's PRESSURE TEST KIT makes it easy to test field-assembled kits with either compressed air or nitrogen.
Earl's Pro-Lite 350™ hose is one of the lightest and most durable hoses available on the market today!
Earl's Pro-Lite 350™ hose is one of the lightest and most durable hoses available on the market today.
Introducing Pro-Lite 390™ from Earl's! A perfect mix of Stainless under braid and fabric outer braid and 100% constructed in the USA. Pro-Lite 390 consists of an inner tube of oil resistant "PKR"...More Details »
Earl’s safety wire is packaged in a convenient one-pound dispenser. The wire pulls and uncoils from the inside with no tangles. The wire is constructed of Mil-Spec 20995 TYPE 302 Stainless Steel wire.
Earl's is proud to offer the state-of-the-art in plumbing hardware for professionals and serious enthusiasts. Crafted from 6061-T6 billet aluminum alloy, these clamps are the finest available to...More Details »
Brake bleeding has always been an inconvenient and messy job. Commercial shops typically use an expensive pressure bleeder—which, unless used properly, can introduce air bubbles into the system...More Details »
All Speed-Flex™ hoses are compatible with gasoline, hydrocarbon fuels, alcohols, nitro-methane, mineral and synthetic lubricants, and high density fuel additives thanks to its stainless braid protected PTFE inner liner.
All Speed-Flex™ hoses are compatible with gasoline, hydrocarbon fuels, alcohols, nitro-methane, mineral and synthetic lubricants, and high density fuel additives thanks to its stainless braid protected PTFE inner liner
Remove the guess work out of fuel/hose compabitility issues! PTFE lined Speed-Seal™ hose ends are available in aluminum, stainless steel, and steel in multiple finishes and are only compatible with Earl's Speed-Flex™ hose.
ANNEALED 304 Stainless Steel Tubing sold on straight lengths only. Ideal for precision hard line systems, and can be polished for a custom look. Easy to form in single or double flare (double flare requires high quality forming tool).
Earl's steel hardline is a double wall low carbon steel, copper brazed tubing that has an olive PVF coating. The olive coating is a PVF (poly-vinyl-fluorine) material that provides superior...More Details »
Earl's steel hardline is a double wall low carbon steel, copper brazed tubing that is Zinc plated. The zinc plated tubing provides great corrosion resistance and good value.
Super Stock™ hose is a high quality synthetic rubber hose reinforced by a full coverage interior braided fabric sheath. It has been REFORMULATED to be more tolerant of the additives present in modern day pump gas.
Designed for use with Earl's Super Stock™ hose these attractive and lightweight hose ends are machined from aluminum alloy and are available in red & blue or Ano-Tuff™ black finishes.
Designed for use with Earl's Super Stock™ hose these attractive and lightweight hose ends are machined from aluminum alloy and are available in red & blue or Ano-Tuff™ black finishes.
Earl's Swivel Seal™ is the most reliable and most widely sold adjustable hose end on the market. It is our premium hose end for rubber lined hose. There is no substitute for quality - ask for Earl's Swivel Seal™ by name!
The hose expander is the first step in the crimping process. This tool expands the ribbed inner liner in preparation for the hose-end barb to be inserted. This tool is for use with Ultra-Pro hose only.
Stainless Steel Braided covering that slips over existing hose and gives the look of an expensive line.
Stainless Steel Braided covering that slips over existing hose and gives the look of an expensive line.
Ultra-Flex™ hose ends are Mil Spec Type III hard anodizing, Teflon impregnated and designed for use with Earl's 650 Kevlar & 660 304 stainless braid hose.
Earl's Ultra Flex™ 650 PTFE hose solves the problem of ever tightening packaging constraints of modern day motorsports while keeping weight to a minimum.
Ultra Flex™ 660 series hose is made from 304 stainless and is 40% lighter and has an average of 14% larger ID than our (and our competitors) stainless braid-protected synthetic rubber hose.
Earl's UltraPro Series was engineered as a system to exceed the rigorous demands of even the most extreme forms of racing. PTFE inner liner is impervious to all known fuels, oils, and coolants used...More Details »
Modern day high performance vehicles require a plumbing system designed to withstand today’s Modern day high performance vehicles require a plumbing system designed to withstand today’s modern...More Details »
Earl’s UltraPro Series hose-ends are manufactured from premium materials to be light weight and rugged and are perfectly matched to Earl’s UltraPro Series hose. Earl’s UltraPro Series...More Details »
Earl’s UltraPro Series hose-ends are manufactured from premium materials to be light weight and rugged and are perfectly matched to Earl’s UltraPro Series hose.
Modern fuels are the enemy of traditional rubber hose (including steel-braided hose) causing deterioration. Rubber hose must be inspected and replaced frequently to eliminate the safety hazards...More Details »
Modern fuels are the enemy of traditional rubber hose (including steel-braided hose) causing deterioration. Rubber hose must be inspected and replaced frequently to eliminate the safety hazards...More Details »
Modern fuels are at war with your fuel system. Modern fuels (more than 40 EPA-approved fuel blends in the US alone) include additives that break down traditional rubber hose. This breakdown leads...More Details »
Earl's Vapor Guard hose ends feature a special smooth retention bead that retains the hose under pressure while assuring the hose liner is not damaged. They’re black brite-dip anodized for good...More Details »
Earls Products
Description: BLACK ST -6 TO 1/2 NPT ADPT
Item #: ERL/AT981668ERL
Condition:
New
Price: $11.62
Description: St. -6 to 1/4 NPT Adapter
Item #: ERL/981606ERL
Condition:
New
Price: $5.74
Description: BLACK ST -6 TO 1/4 NPT ADPT
Item #: ERL/AT981606ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $5.11
Description: ST. -6 TO 1/4 NPT ADAPTER STAINLESS STEE
Item #: ERL/SS981606ERL
Condition:
New
Price: $12.84
Description: St. -6 to 1/8 NPT Adapter
Item #: ERL/981662ERL
Condition:
New
Price: $5.11
Description: BLACK ST -6 TO 1/8 NPT ADPT
Item #: ERL/AT981662ERL
Condition:
New
Price: $6.21
Description: ST. -6 TO 1/8 NPT ADAPTER STAINLESS STEE
Item #: ERL/SS981662ERL
Condition:
New
Price: $18.01
Description: St. -6 to 3/8 NPT Adapter
Item #: ERL/981666ERL
Condition:
New
Price: $6.81
Description: BLACK ST -6 TO 3/8 NPT ADPT
Item #: ERL/AT981666ERL
Condition:
New
Price: $6.68
Description: ST. -6 TO 3/8 NPT ADAPTER STAINLESS STEE
Item #: ERL/SS981666ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $21.87
Description: St. -8 Female to 1/2 NPT Swivel
Item #: ERL/916188ERL
Condition:
New
Price: $17.44
Description: St. -8 Female to 1/4 NPT Swivel
Item #: ERL/916107ERL
Condition:
New
Price: $13.64
Description: St. -8 Female to 3/8 NPT Swivel
Item #: ERL/916108ERL
Condition:
New
Price: $12.96
Description: BLACK ST -8 FEMALE-1/2" NPT SWIVEL
Item #: ERL/AT916188ERL
Condition:
New
Price: $17.78
Description: BLACK ST -8 FEMALE-1/4" NPT SWIVEL
Item #: ERL/AT916107ERL
Condition:
New
Price: $14.81
Description: BLACK ST -8 FEMALE-3/8" NPT SWIVEL
Item #: ERL/AT916108ERL
Condition:
New
Limited Supply: Only 1 Left!
Price: $14.87
Description: St. -8 to 1/2 NPT Adapter
Item #: ERL/981688ERL
Condition:
New
Price: $7.48
Description: BLACK ST -8 TO 1/2 NPT ADPT
Item #: ERL/AT981688ERL
Condition:
New
Price: $7.95
Description: ST. -8 TO 1/2 NPT ADAPTER STAINLESS STEE
Item #: ERL/SS981688ERL
Condition:
New
Limited Supply: Only 5 Left!
Price: $23.73
Description: St. -8 to 1/4 NPT Adapter
Item #: ERL/981607ERL
Condition:
New
Price: $11.11
Description: BLACK ST -8 TO 1/4 NPT ADPT
Item #: ERL/AT981607ERL
Condition:
New
Price: $10.84
Description: ST. -8 TO 1/4 NPT ADAPTER STAINLESS STEE
Item #: ERL/SS981607ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $12.84
Description: St. -8 to 3/8 NPT Adapter
Item #: ERL/981608ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $8.60
Description: BLACK ST -8 TO 3/8 NPT ADPT
Item #: ERL/AT981608ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $8.60
Description: ST. -8 TO 3/8 NPT ADAPTER STAINLESS STEE
Item #: ERL/SS981608ERL
Condition:
New
Price: $20.58
Description: SUPER-STOCK CRMP DIE 5/8 H REIN
Item #: ERL/D03111ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $136.95
Description: T 10Mm 10Mm 3/8If C-Mt W Nut
Item #: ERL/972056ERL
Condition:
New
Price: $21.04
Limited Supply: Only 4 Left!
Price: $24.49
Description: T BRAKE ADAPTER W/ BRKE LGHT SWITCH PORT
Item #: ERL/972052BERL
Condition:
New
Price: $17.33
Description: T56 CLUTCH MASTER/SLAVE TO -4 MALE AN
Item #: ERL/LS641001ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $15.83
Description: T56 CLUTCH SLAVE/MASTER TO -4AN ADAPTER
Item #: ERL/LS640281ERL
Condition:
New
Price: $39.30
Description: T56 CSC QUICK DISCONNECT TOOL
Item #: ERL/050ERL
Condition:
New
Price: $5.73
Description: VG REPL FILTER ELEMENT 10 MICRON
Item #: ERL/SP0001ERL
Condition:
New
Price: $7.81
Description: VG REPL FILTER ELEMENT 100 MICRON
Item #: ERL/SP0003ERL
Condition:
New
Price: $6.69
Description: VG REPL FILTER ELEMENT 30 MICRON
Item #: ERL/SP0002ERL
Condition:
New
Price: $6.69
Description: Water Neck, 1-1/2 Opening
Item #: ERL/166015ERL
Condition:
New
Limited Supply: Only 6 Left!
Price: $36.76
Limited Supply: Only 0 Left!
Price: $33.20
Description: WELD PLATE FLAT CENTER 1-3/8 (5)
Item #: ERL/PAN8222-ERL
Condition:
New
Description: WELD PLATE L/W FLAT NOTCHED 1 IN SPRG(5)
Item #: ERL/PAN8111-ERL
Condition:
New
Price: $4.84
Description: WELD PLATE RECESSED CENTER 1-3/8 (5)
Item #: ERL/PAN8200-ERL
Condition:
New
Description: WELD PLATE SELF EJEC REC CENTR 1 IN (5)
Item #: ERL/PAN8122-ERL
Condition:
New
Price: $7.28
Description: WELD PLATE SELF EJEC REC CENTR 1-3/8 (5)
Item #: ERL/PAN8215-ERL
Condition:
New
Limited Supply: Only 8 Left!
Price: $7.28
Description: WELD PLATE U/L DIMPLED CENTER 1-3/8 (5)
Item #: ERL/PAN8223-ERL
Condition:
New
Limited Supply: Only 0 Left!
Price: $4.84
Description: WELD PLATE U/L FLAT CENTER 1-3/8 (5)
Item #: ERL/PAN8225-ERL
Condition:
New
Price: $4.84